C6含氟织物整理剂KDFA-02
-
C6含氟织物整理剂KDFA-02
产品简介
KDFA-02采用全氟己基乙基丙烯酸酯作为含氟单体制备的环保织物整理剂。产品不含PDOA,且在使用中也不会分解出PDOA，因此具有良好的安全性。
产品特性
1.KDFA-02赋予织物优异的防水防油效果及耐洗性能。
2.KDFA-02适用于天然纤维，化学纤维和混纺织物。
3.KDFA-02 具有自交链性能，在高温下处理时可产生拒水拒油薄膜，不影响织物手感，优异的耐洗牢度。
4.KDFA-02良好的加工相容性，可与防紫外线，阻燃，抗菌整理等助剂同浴使用。
5.KDFA-02具有良好的使用效果，对织物的白度，色光，强力，手感和吸湿透气性无不良影响。
6.KDFA-02无毒，安全，对皮肤无刺激性，无需使用含有甲醛的交联剂。
产品指标
外观 乳白色或淡黄色液体
主要成分 含氟有机共聚物
离子型 弱阳离子
含固量（%） 23±0.5
密度（20℃ g/ml） 102-1.06
PH值 4.5-6.5
溶解性 易溶于冷水
使用方法
KDFA-02 通常用于浸轧法,具体用量，用法需根据织物的品种，密度，克重而定，以下为参考工艺。
1.纯棉织物
用量： 15-50g/l
工艺流程：浸轧（浸轧率：60-70%）→干燥（100℃×2~3min）→培烘（170℃×1min）
2.涤纶织物
用量： 10-30g/ml
工艺流程：浸轧（浸轧率：60-70%）→干燥（110℃×2~3min）→培烘（170℃×1min）
3.晴纶织物
用量： 10-40g/ml
工艺流程：浸轧（浸轧率：60-70%）→干燥（110℃×1~2min）→培烘（170℃×1min）
4.涤/棉混纺织物
用量： 20-50g/ml
工艺流程：浸轧（浸轧率：60-70%）→干燥（110℃×2~3min）→培烘（170℃×1min）
本资料所含信息真实可信，依据本公司现有的技术知识和经验编写，仅供参考研究之用，不做任何保证。建议使用者在大量使用前根据各自的工艺条件，进行针对性试验以达到最佳效果。
C6 Fluorine Finishing Agent KDFA-02
Product Info
KDFA-02 is a Finishing agent which produced by full Fluorine monomers.Not contain also will not decompose PDOA during using as well.Good Safety.
Characteristic
1.KDFA-02 Brings the fabric excellent waterproof,Oil resistant and Washing fastness.
2.KDFA-02 Suitable for nature,chemical and blending fabric.
3.KDFA-02 Self-Crosslinking ability,Can produce Water and Oil resistence film Under high temperature treatment,Not effect the handle of fabric.Good washing fastness.
4.KDFA-02 Well processing compatibility,can use with Anti-UV agent, Fire Retardant and Anti-Bacterial finishing agent in the same bath.
5. KDFA-02 Good apply result.Not effect the whiteness, shade,strength,handle,breathable and moisture ability of fabric.
6.KDFA-02 Nontoxicity,Safety,No irritants on skin,No need Formaldehyde Crosslinking agent.
Product Index
Appearance : Milk white or Yellowish liquid
Main Component Fluorinated organic copolymer
Ion Weak Cation
Solid Content(%) 23±0.5
Density（20℃ g/ml） 102-1.06
PH 4.5-6.5
Solubility Easily soluble in cold water
Application
KDFA-02 Use to use in Padding,the actual dosage should be according to the variety,density,weight of fabric.bellow was the suggestion for application:
1.Pure cutton
Dosage 15-50g/l
Application process:
Padding (Padding rate 60-70% ) →Predrying（100℃×2~3min）→Baking（170℃×1min）
2.Polyester Fibre
Dosage 10-30g/ml
Application process:
Padding (Padding rate 60-70% ) →Predrying（110℃×2~3min）→Baking（170℃×1min）
3.Acrylic Fibre
Dosage 10-40g/ml
Application:process:Padding(Padding rate 60-70% ) →Predrying（110℃×1~2min）→Baking（170℃×1min）
4.Polyester/Cotton blending Fibre
Dosage 20-50g/ml
Application process:
Padding (Padding rate 60-70% ) →Predrying（110℃×2~3min）→Baking（170℃×1min）
The information contained in this document is authentic and reliable, written based on existing technical knowledge and experience of the company.Only with reference and research purposes, without any guarantee.Users are recommended to do the targeted test before bulk use according to their technology and conditions, in order to achieve the best results.